gps tracker with software

Product Summary:
Our gps tracker GPS103 is a easy to use and install gps/sms/gprs vehicle trackers,it can be installed on Bus ,taxi,truck,personal car ,business car,all support12~24V .It is working Based on existing GSM/GPRS network and GPS satellites, this gps tracker can locate and monitor any remote targets by your cell phone, PDA or PC. It can work anywhere in the world. Different from other vehicle trackers, this gps tracker can get street name from cell phone , configurable by pc remotely terminal ,get car door ,window status via SMS.

But it also can do:
Support both GPS / GSM station positioning ways.
Support SMS/GPRS/Internet Network data transfer
(GPRS/Internet instructions in CD enclosed）
Support GPRS on-line and the line re-connected automatically.
Support work based on existing GSM/GPRS network..
Support configuration by remote terminal.
Standby current is only 80mA.
Support for point-to-point, point to group, group-to-group monitoring
Set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety.

Hardware Description For this Car GPS Tracker

Specification:

How to Use GPS tracker:
A.Easy to install ,basicly steps:
1.Insert the wiring harness with the allocation of products to the correct wiring holes.
2.To identify and cut off the car's fuel pump control circuit, the red wire connect with the engine side, yellow wire connect with the oil side.
3.Red and black wires, that is the product’s power cords connect with the positive and negative of car power, the red connect with the positive of car power, and the black connect with the negative of car power.
4 .Red-black wire connect to the SOS button.
5.Knowing about the type of the door trigger is positive or negative trigger. And connect the right wires to the door control circuit. In this case, It will alarm when the door open in armed state.
6.As shown below, insert the sensor plug into the sensor slot
7.Connect GPS antenna connected to the GPS antenna terminal and connect the GSM antenna to GSM antenna plug.
8.Insert the external monitor mic into the monitor jack.

B.After you install the gps tracker, you can do as follows :
1. Put SIM card and antenna in place ,  to make sure it get GPS /GSM signal .
2. Change password to any which you like ,and protect it
3. You can set 5 numbers to be authorized ,and then just these five people can know where
you are ,and change all parameters of GPS103
4. Get the SMS location        
5.Set voice surveillance use command for SMS monitor +Password (The detials you can get from our manual )
6,Low battery alert
7,Power off alert
8,Set Move alert
9,Over speed alert
10,SOS button preset number
12,Cut off the oil and power
13,GPRS setting to cometrue tracking realtime and Live
14,Set up the type of car door trigger
15,Check the vehicle status:

C.Get the street name from your cell phone:
If you want to get where is your car or children from your cell phone , you just need to Make a call to the gps tracker GPS103, it will reply you a SMS as follows, The SMS received from tracker include a website link ,
enter the link through your cell phone to get the detailed position.

As shown below

D.Make your own tracking Monitor center on your own PC

Your PC is a mini server ,and don’t restrict any mid-server operator ,we will send you a software in the CD ,you just need to install it on your own PC , one software on one PC can monitor 255 target trackers at most.

GPRS data transfer through pc to gps tracker device real time ,easy steps like
1,Get IMEI from gps trackers
2,Setting up API ,username and Password to connect GPRS
3,Set IP and port for gps tracker

The work route: